Tag Archives: DIY

Castles Made of Concrete

View this post on Instagram

Life and Death of a DIY.

A post shared by B.U.D. (@ouroot) on

When we began building our DIY spot I wanted to believe it could survive, but part of me was putting all that work into it expecting destruction and I was okay with that.  I was viewing it as a sandcastle destined to wash away in the seas, or more precisely, I looked at it as a ritual temporary creation like a sand painting or dry-painting.  I helped create our DIY as a sacred practice and it evoked moments of altered consciousness and deep clarity within myself.  It was also just simple awesome fun.

With my grand concepts of non-attachment in place I was able to handle the news of it’s destruction without a problem.  Our City posted a red notification of our “wrongdoing” and their intention to get rid of what we had done.  I thought they would clear away our work, but they went full out and also crushed the foundation we built upon.  I actually felt a strange pride that our joyful creations resulted in such a drastic reaction that likely cost more than we spent building it.

While I had initially thought I was detached from it’s possible destruction, when I actually went to see the remains of our DIY I got emotional.  I was alone and the first of the original builders to see it, and our wonderland was practically unrecognizable.  Suddenly my correlation to sand painting struck home teaching me about loss through skateboarding.  I helped create something and became familiar with nearly every inch of it, and then all of a sudden it was all obliterated.  As sad as it all makes me, I love the experience for it’s lesson and treasure every moment I shared with my friends.  I recommend it!


Leave a comment

Filed under Articles

Do It Yourself: WSR Land

I have day-dreamed of having a DIY spot for a long time.  When I was growing up I was lucky enough to live in a home with an abnormally large yard to skate and I was able to build a lot of things out of wood, metal, and whatever I could find.  Those rails and ramps were wonderful, but an opportunity to create something more permanent out of concrete didn’t come around for thirteen years.  Well, I had one chance but I didn’t know what I was doing and it sucked.

The beginning of WSR Land was actually way back in 2007 during Calavera’s Prescott Poker Run on Go Skateboarding Day.  We were all meeting up in a parking lot, but next to that was an area where a building recently burnt down.  Amongst the ashes, there was a slab of smooth concrete, so we started skating flatground on there waiting for the Poker Run to begin.  Then someone found a nice sized piece of wood and we propped up up against a brick structure (seen broken down to half the size on the left side the picture below) and suddenly we made a bank to skate.  We sessioned that for a short time and I thought of how cool it would be to make a DIY spot there.


Flash forward around seven years later and my friend Dylan walked by the same spot and had the same idea.  Realizing nothing had happened there for that long, I started to think we just might get away with it.  We started small, brought some curbs and other little skateable things, and then we just waited so see what would happen.  A while went by and no one seemed bothered, so we slapped some concrete against a parking block to make a tiny quarter-pipe.  After that things went smoothly, and then suddenly someone brought a wooden quarter-pipe and placed it at one end.  We had no idea who did it, but soon we all had the same thought; make it concrete.


Once we discovered who brought the ramp we asked him if we could tear it apart and use it as a form, and he was just as stoked as we were.  It was at that point my first real concrete project began, and I enjoyed every moment of it from planning to pouring.  My greatest contribution was finishing out the back-fill shaping with some debris and bricks that were laying around, many of which were from taken from where we made the bank years ago.  It wasn’t easy but it also wasn’t too hard.  More importantly, the end result is fun to skate!

Without any technical permission it was a risk, but we needed to see what we could get away with.  It has been over two months since we created the quarter-pipe and there hasn’t been any trouble.  The police have even come several times and said as long as they don’t get any complaints they don’t mind.  It was one of few occasions I wasn’t kicked out of a skate spot when the law arrived, and that made WSR Land even more amazing.  Now we are beginning the next phase of building and this will push the boundaries of how much we can get away with.  By adding more visible alterations it ups the chance of getting busted, but the magic makes  it worth the risk.



Here is another post I did about DIY skating.

1 Comment

Filed under Articles, Videos

Do It Yourself


I like to make things skateable.  When I think about it I have been like that ever since I started skating.  The first major modification I can think of was creating my flatbar out of rusted metal bars I found at my middle school.  It was a big piece of wooden and metal junk and I am still unsure of it’s purpose.  I asked the school officials if I could take it and they said it was okay, so my parents loaded it into our pickup and we were set.  My Mom was welding at the time and she had to cut the main bars off of the whole contraption.  We bolted the metal bars onto some wooden planks and I still skate that flatbar ten years later.

As I have grown I think I actually go out of my way to make things skateable.   To me, figuring out how to skate something in a new way is a trick in itself, and I like those tricks.  So it follows that making a previously unskateable spot skateable can be even better.  With this attitude I spent a week shoveling rocks and gravel at my local skatepark to make a new spot.  I am not sure but I think Kramer named it after me, and years later it is still called Bud’s Gap.  I have done a lot of cool tricks at that park, but making a new spot for everyone to skate will always be my best trick.

Today I was working with quickcrete during my job.  I have never worked with anything like it before, but as a skater I have always wanted to.  Luckily my Dad is my boss, so when there was a little bit left over he said I could start a new spot.  As soon as I got the okay I was as giddy as a teenage skate-rat.  Working on it and smoothing it out was strangely fun despite the simplicity.  I was going for a rough tranny to mainly make a wallie spot, but it looks like I will need a little more ‘crete.  The only hard part now is waiting for it to be done!


1 Comment

Filed under Articles, Uncategorized